White is the most adaptable spool on the shelf. Left bare it suits lampshades, diffusers and light guides, where the material spreads an LED evenly instead of throwing a hotspot through the wall. Primed, it is the quickest base for painted miniatures and props, because you are not fighting a dark colour underneath every coat. The Hyper formulation keeps up with the accelerations of a modern printer without the extruder falling behind, so the broad flat surfaces that show every flaw on white come out consistent. Stored out of direct sun, it stays bright rather than drifting towards cream on the shelf.
Specifications
| Material | PLA |
|---|---|
| Colour | White |
| Diameter | 1.75mm |
| Spool weight | 1kg |
| Nozzle temperature | 210-230 °C |
| Bed temperature | 45-60 °C |
| Print speed | Up to 600 mm/s |
| Brand | Creality |
Temperatures and speeds are recommended starting points for this material. Fine-tune them to your printer and your part.
Before you print
Needs a printer rated for high-speed printing to reach the top of that range.
Good for
- Lamp shades and light diffusers
- Miniatures and props before painting
- Signage and lettering blanks
- Clean prints for client presentation
