Luminous blue does two things at once: it fluoresces sharply under ultraviolet and retains a quiet glow for a while after the light is cut. In daylight it reads as a clean electric blue rather than a pastel. SA Filament produces the UV Neon range locally, so a colour you matched a project to stays available to match again later. Handling is standard PLA throughout, which keeps it within reach of anyone still learning their machine. It works particularly well on layered or backlit pieces, such as lamp diffusers, aquarium ornaments and night signage, where the afterglow adds something once it gets dark.
Specifications
| Material | PLA |
|---|---|
| Colour | Blue |
| Finish | Glow in the Dark, Fluorescent |
| Diameter | 1.75mm |
| Spool weight | 1kg |
| Nozzle temperature | 200-220 °C |
| Bed temperature | 45-60 °C |
| Print speed | Up to 100 mm/s |
| Brand | SA FILAMENT |
Temperatures and speeds are recommended starting points for this material. Fine-tune them to your printer and your part.
Before you print
Glow and fluorescent pigments are abrasive. A hardened nozzle will last considerably longer.
Good for
- Backlit panels and lamp diffusers
- Aquarium and terrarium ornaments
- Garden markers visible after dark
- Themed props and set dressing
