White Pine is a PLA blended with fine wood fibre, so prints come off the plate with a pale, grainy surface rather than a plastic sheen. The appeal is what happens afterwards: it sands back to a smooth face, takes wood stain in the uneven way real timber does, and can be waxed or oiled for a finished look. Creality keeps the blend fine enough to feed reliably on a standard hot end, though a hardened nozzle is worth having if you print filled materials often. Best suited to decorative work where the finish matters more than outright strength.
Specifications
| Material | Wood-Filled PLA |
|---|---|
| Colour | White |
| Finish | Wood-Filled |
| Diameter | 1.75mm |
| Spool weight | 1kg |
| Nozzle temperature | 190-220 °C |
| Bed temperature | 45-60 °C |
| Print speed | Up to 80 mm/s |
| Brand | Creality |
Temperatures and speeds are recommended starting points for this material. Fine-tune them to your printer and your part.
Before you print
Use a 0.4 mm nozzle or larger. Wood fill can block finer nozzles.
Good for
- Decorative panels and wall pieces
- Model buildings and tabletop terrain
- Picture frames and trinket boxes
- Props needing a timber look